Laerdal.com  •  MySimCenter.com


Welcome to Simulation User Network Sign in | Join | Help
in Search
  Learn more about SimStore

Sim man not breathing

Last post 02-06-2014, 9:23 PM by lbell927. 4 replies.
Sort Posts: Previous Next
  •  01-16-2014, 6:00 PM 5292

    • Lori Bell is not online. Last active: 01-16-2014, 11:12 PM Lori Bell
    • Not Ranked
    • Joined on 01-16-2014
    • Graham Hospital School of Nursing
    • Unknown
    • Posts 1

    Sim man not breathing

    My sim man is not breathing.  The link box is blinking red.  I tried all the connections - they all seem to be connected.  I tried updating the sim man but it did not detect the mannikin or anything else.  Any ideas for what else to try?  Thank you. All suggestions are much appreciated.
  •  01-16-2014, 7:05 PM 5293 in reply to 5292

    Re: Sim man not breathing

    Hi Lori,

    First of all, the red light on the LInk Box should be a solid red (not blinking) when your computer is connected to the SimMan software....and it's up and running. So you may need to reboot your computer or at least exit out of the SimMan software..and then open it again.

    Second, be sure that the compressor is turned off. Then turn the red knob (Drain) clockwise to release any remaining compressed air. Return the red knob to the original (vertical position). I usually turn the compressor on after I start the process of opening the SimMan software. But I don't turn the blue "air" knob (middle) clockwise until the software has fully opened ....and is running. Hope this helps!

  •  01-16-2014, 7:07 PM 5294 in reply to 5292

    • Jim Dukes is not online. Last active: 01-21-2014, 5:47 PM Jim Dukes
    • Not Ranked
    • Joined on 01-09-2014
    • Middle Tennessee School of Anesthesia
    • United States
    • Posts 2

    Re: Sim man not breathing

    Try going into device manager on the computer and delete the com port, then restart computer. It will reinstall com port and should help.

     

    Jim 

  •  01-16-2014, 7:11 PM 5295 in reply to 5292

    Re: Sim man not breathing

    1. Be sure you have drained the compressor! Turn off, then turn top red knob (drain) clockwise so that it's horizontal.

    2. Exit out of SimMan software. Perhaps reboot your computer. Open this software....I usually turn the compressor on at this time. Then after SimMan software has fully opened....and you see "healthy patient" running, turn the middle knob (blue - air) clockwise (horizontal). Hopefully this will help!

  •  02-06-2014, 9:23 PM 5328 in reply to 5294

    • lbell927 is not online. Last active: 02-06-2014, 9:33 PM Lori Bell
    • Not Ranked
    • Joined on 11-14-2013
    • Graham Hospital school of nursing
    • Unknown
    • Posts 1

    Re: Sim man not breathing

    Thank you so much. I tried this and it worked. Thanks again.

View as RSS news feed in XML