Laerdal.com  •  MySimCenter.com


Welcome to Simulation User Network Sign in | Join | Help
in Search

Browse by Tags

All Tags » AVS   (RSS)
Showing page 1 of 2 (20 total posts)
  • Video streaming performance issues with multiple AV servers in the same LAN segement

    I support 3 AV servers, 3 SimMan laptops and 30 potiental Video Clients I have left all the port configurations to there default values. At times Camera 1 will freeze, or not be displayed on startup of the Video Client.  Currently I have 3 monitor laptop all using server port 5001. I also have 3 Video Servers with Server Port setting of ...
    Posted to SimMan/SimBaby Technical (Forum) by RX87325 on December 2, 2012
  • AVS media viewer for .264 file types

    This is a viewer for the files created by the AVS video server when you save them from the client and are not using the simman debrief software.  unzip the files.  Go into the folder and click on setup.  You don't have to download codecs etc.  This is from Laerdals software.  Tech support didn't seem to know it existed.
    Posted to User General (FileGallery) by Sandi Lee on April 27, 2012
  • Sim Tech Meeting in Vegas

    Hi everyone!Laerdal Technical Staff will be on hand to train in hardware and software at the Clinical Simulation Center of Las Vegas' Gathering of Technicians Meeting, August 5th & 6th! Learn more about our technicians based meeting at: http://csclv.nevada.edu/csclv/index.cfm/sim-tech-gathering/ There's still time to ...
    Posted to General (Forum) by LWBaily on May 25, 2011
  • New Technology makes Efforts easier in the Control Room

    Allow me to apologize first of all, for my tendency to elaborate in excess.  I know your time is valuable, and that quick snippets is often the preferred format for entering into these discussions.  However, if your time is short, I recommend that you print out my extended posts (if the topic is of interest to you), and review them at a ...
    Posted to SimMan/SimBaby Technical (Forum) by hyoung on November 12, 2010
  • Advanced Video System - video quality/rendering inquiry

    Currently, our simulations are performed like ''speed sims'' with 5-10 minute scenarios.  We have attempted to run scenarios 15-20 minutes, to allow students to perform assessment and proper interventions; however scenarios running more than 10 minutes result in file integration taking up to 5 minutes before we are able to debrief.  This ...
    Posted to General (Forum) by mccarrillo on August 11, 2010
  • Re: Monitor traces glitch on AVS and when debriefing

    Have you looked at your Video Recording Configuration where Patient monitor recording is enabled?  You have the choice to select from low, medium and high quality.  If you are using less than High, you may see dropped pixels in the traces [wave forms].  While there may still be some pixelation with high, it will be greatly ...
    Posted to SimMan/SimBaby Technical (Forum) by hyoung on May 7, 2010
  • Re: Exporting / Playing Video from Scenario Debrief File

    Hi there,  I have recently had some luck with being able to view the mp4 files after unzipping them. I used the K-Lite Codec pack which contains it's own video viewer. I already knew it as a good pack for watching varied video files but I was pleased that it worked with the unzipped files here.   I used the Full version of the ...
    Posted to SimMan/SimBaby Technical (Forum) by AlexRawlings on January 28, 2010
  • Monitor traces glitch on AVS and when debriefing

    Hi,  when using Sim Baby the traces on the patient monitor section of the AVS (and therefore debriefer) glitch and I cant rectify this. I have reinstalled the new software 1.4.1 and it's still the same. When using Simman we don't have this problem, could anyone help and let me know if this is a bug or there is a quick fix solution,, many ...
    Posted to SimMan/SimBaby Technical (Forum) by Freemansim on December 2, 2009
  • No Audio Signal From Microphone

    Hi, Has anybody had a problem recording audio onto the debreifing session? I have looked everywhere (i think!) and i cant seem to get an audio input from the mic to the server, can anybody please help?   thanks   Jon
    Posted to SimMan/SimBaby Technical (Forum) by Freemansim on May 21, 2009
  • Exporting / Playing Video from Scenario Debrief File

    ****UPDATE***** Installing codec Windows Media Player Filter v4.6.0.5.exe does allow me to watch camera1.mp4, HOWEVER, as Carlos Kok suggests below, this only produces a codec for CAMERA ONE. Can we get a list of all necessary codecs? Then this will all be quite easy. The codec can be downloaded from:  ...
    Posted to SimMan/SimBaby Technical (Forum) by LWBaily on March 9, 2009
1 2 Next >