Laerdal.com  •  MySimCenter.com


Welcome to Simulation User Network Sign in | Join | Help
in Search

Browse by Tags

All Tags » Simpad   (RSS)
  • Blinking red light on Simpad

    Hi everyone, I have a simpad that will not power on.  I see a blinking red light and then nothing.  I have tried a different charging cable and a different outlet to rule out both easy fixes.  Has anyone experienced this or have a solution?  Thanks!Krista 
    Posted to SimPad (Forum) by Krista1510 on February 20, 2019
  • Link box start up

    Have several link boxes that on power up will not get a second green light (wifi) to light.  Sim Pad plus will not connect to link box.  3 simulators have a different start up then all the other units.  Is there a way to correct that?   Thank You John Gurriell 
    Posted to SimPad (Forum) by Gurrie on January 16, 2019
  • Simpad/Linkbox wifi connectivity issue on 5.9.1 Build 138

    I recently updated my Simpads + Linkboxes to the latest build (5.9.1 Build 138) and I've noticed a few of them are not maintaining their wifi connection. We have about 20 or so and I've found 3 at least with this problem recently. They will initially connect over wifi and then after a few minutes the connection will drop and the only way to ...
    Posted to SimPad (Forum) by Pbenson on March 14, 2017
  • Sim pad and link box connectivity

    We recently sent one of our sim pads for repair after it was dropped and failed to have display. Once it was returned we have not been able to get the simpadand link box to link up and the simpad does not detect any link boxes. Does anyone know how to fix/correct this issue? Thanks!  
    Posted to SimPad (Forum) by lorab on December 21, 2014
  • Simpad Rhythm Change Delays

    I use the simpad in manual mode for all of my ACLS scenarios with megacode kelly advanced. Why does it intermittently take up to 5 sec to switch to a new rhythm. Transition time is set to 0 sec.  Once it starts delaying rhythm changes it usually does not get better from that point on.  You want it to simulate a patient and if all the ...
    Posted to SimPad (Forum) by jonathanjung on October 24, 2013
  • EKG monitor use on simpad enabled vital sim

    I now have 2 simpad enabled mannequins and one monitor.  Is it possible to connect my EKG monitor (a Dash 1000 mby Marquette) to the other mannequin so that I can have 2 EKG rhythms visible simulataneously for the two mannequins?  This  monitor did work on the mannequins before the trade in, but doesn't now.
    Posted to VitalSim & SimPad Manikins (Forum) by sb23 on September 17, 2013
  • Re: What's new in Simpad 1.5.1?

    Not sure why they haven't posted the upgrade changes with the 1.5.1 upgrade.  Almost all software designers always post the changes when releasing an update.  I haven't been able to find any document.  2 things are the inclusion of ETCO2 Waveform and a screen were you can turn off selected waveforms on your patient monitor. I am ...
    Posted to SimPad (Forum) by jonathanjung on July 5, 2013
  • Simpad linkbox blinking - won't start

    Hello,   I have a linkbox that just has one light blinking slowly, which should indicate it is starting, but it won't fully start.  It worked ok for several weeks but now it doesn't. I tried to put on the latest update, but since it won't start, it won't update.  Is there a way to do a hard reset?  Any other ideas?  ...
    Posted to SimPad (Forum) by SHudson on March 18, 2013
  • Re: Getting Started

    The DFU says the SImMan 3G software is compatible. Does this mean if I have a SimMan 3G patient monitor installed on a computer, I can select the vitalism that I now have on the network and use it as a Vitals monitor?   Thanks so much, 
    Posted to SimPad (Forum) by evanbartley on August 4, 2012